SV650.org - SV650 & Gladius 650 Forum - View Single Post - Renthal bars

Bibio · 28-05-18, 09:36 PM

"loose fit" the controls and grips then make sure that they are working correctly then cut the renthals.

DONT cut the nibs off the switchgear. wrap some electrical or masking tape to the bars then "nip" the switchgear screws up when in place. this will put indents into the electrical/masking tape so you know where to drill the holes for the nibs.

28-05-18, 09:36 PM	#2
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: Renthal bars - cut them down? "loose fit" the controls and grips then make sure that they are working correctly then cut the renthals. DONT cut the nibs off the switchgear. wrap some electrical or masking tape to the bars then "nip" the switchgear screws up when in place. this will put indents into the electrical/masking tape so you know where to drill the holes for the nibs.