SV650.org - SV650 & Gladius 650 Forum - View Single Post - Barback Risers & Stock Cables

22-06-18, 04:48 PM

Quick but important update: During my first ride with the 20mm risers the clutch became a problem on full (and near full) right hand lock. So much so, it would prevent the gears from engaging and was actually quite dangerous in traffic. I stopped and adjusted the cable slightly but it didn't fix the problem. When I returned home I had to removed the clip/cage from around the cables, clip of the zip ties and by doing so give the cable just enough slack for it not to pull on full lock. So whilst the 20mm does not require a new cable it does require adjustments in order to work properly.

22-06-18, 04:48 PM	#24
WightDiamond Guest Posts: n/a	Re: Barback Risers & Stock Cables - 2017 L7 Quick but important update: During my first ride with the 20mm risers the clutch became a problem on full (and near full) right hand lock. So much so, it would prevent the gears from engaging and was actually quite dangerous in traffic. I stopped and adjusted the cable slightly but it didn't fix the problem. When I returned home I had to removed the clip/cage from around the cables, clip of the zip ties and by doing so give the cable just enough slack for it not to pull on full lock. So whilst the 20mm does not require a new cable it does require adjustments in order to work properly.