SV650.org - SV650 & Gladius 650 Forum - View Single Post

R1ffR4ff · 12-05-18, 09:15 AM

Had a look at my old page and it reminded me.I don't know if the Float needle valves on the SV650 work the same way but..

Note:There is a small very tiny spring loaded plunger in on top of the Float Needle Valves.This must operate correctly.Press it down with your finger and make sure it moves up and down easily.You can free it up if seized with a bit of WD40 unless it's totally kaput.They come in the correct carb/float kits for your model.

It would be worth knowing if they are constructed the same?

12-05-18, 09:15 AM	#5
R1ffR4ff Member Mega Poster Join Date: Feb 2017 Location: JAMOADR(1999 Curvy) 36,000 miles Posts: 1,429	Re: Idle adjust cable Had a look at my old page and it reminded me.I don't know if the Float needle valves on the SV650 work the same way but.. Note:There is a small very tiny spring loaded plunger in on top of the Float Needle Valves.This must operate correctly.Press it down with your finger and make sure it moves up and down easily.You can free it up if seized with a bit of WD40 unless it's totally kaput.They come in the correct carb/float kits for your model. It would be worth knowing if they are constructed the same? __________________ "Stultus est sicut stultus facit"