Re: 2005 SV650s Valve Clearance Question
Quote:
Originally Posted by egcSV650s
I originally measured the gaps in imperial but ive measured them again the other day in metric and here are the measurements
Front Cylinder
Intake - Both are 0.102 (use 175 in both)
Exhaust - One was 0.178 (use 170) and the other 0.152 (use 165)
For both the intakes i had 178 shimsin there and for both exhaust i had 175 shims
Rear Cylinder
Intake - Both are 0.063 (use 165 for both)
Exhaust - Both are 0.178 (use 165 for both)
For the intake i had one shim at 172 and the other 175 and for the exhaust i had one shim at 170 and the other 172
|
Now if I've done me sums right you only need to buy 5x165 shims because you can already have 2x175 and 1x170.
__________________
SV650N K1
Last edited by Dave-the-rave; 11-01-18 at 11:16 PM.
|