Quote:
|
it wouldn't surprise me if it was the control box cos it lights up, but the grips dont get hot... best way of working it out?
|
If you have a simple multi-meter you can check the resistance of the grips and the 12v supply from the control box quite easily.
If you disconnect the grips from the control box check you hav 12v DC coming out with it switched on (with ignition on if wired through switched supply)
If you have got 12V there then check resistance of the grips, select ohms scale on the multi-meter and do a quick continuity check. Both grips should have the same resistance otherwise they won't heat evenly.
Finallt check the connectors themselves for corrsion or broken wires.
Hope this makes sense
Good luck
