SV650.org - SV650 & Gladius 650 Forum - View Single Post - Pointy won't start after datatool S4 removal

DJ123 · 25-03-14, 07:41 PM

Did you remember from where you removed the wiring from? You probably have to reconnect a circuit in order for the bike to start.
IIRC the alarm will use one of 2 circuits to prevent the bike from starting: 1) ignition 2) fuel pump

A Haynes manual has the full wiring circuit in it and a very useful thing to have. Need to make sure your getting power through the wires on both circuits to find out which one is not complete.

25-03-14, 07:41 PM	#7
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Pointy won't start after datatool S4 removal Did you remember from where you removed the wiring from? You probably have to reconnect a circuit in order for the bike to start. IIRC the alarm will use one of 2 circuits to prevent the bike from starting: 1) ignition 2) fuel pump A Haynes manual has the full wiring circuit in it and a very useful thing to have. Need to make sure your getting power through the wires on both circuits to find out which one is not complete. __________________ BMW F800ST