SV650.org - SV650 & Gladius 650 Forum - View Single Post - Curvy SV650

mikerj · 06-11-17, 11:19 AM

The indicator warning light not working will most likely be because the bulb has blown. This bulb is driven via a couple of diodes within the clocks, it's just possible but extremely unlikely that both of these have failed open circuit.

The fuse would definitely be the first port of call for the clocks not working. If that's ok and you are getting power to the clocks with the ignition on (red wire in connector) then it's a fault within the clocks themselves.

06-11-17, 11:19 AM	#3
mikerj Member Join Date: Jul 2010 Location: Devon Posts: 876	Re: Curvy SV650 - Speedo and Revs not registering. The indicator warning light not working will most likely be because the bulb has blown. This bulb is driven via a couple of diodes within the clocks, it's just possible but extremely unlikely that both of these have failed open circuit. The fuse would definitely be the first port of call for the clocks not working. If that's ok and you are getting power to the clocks with the ignition on (red wire in connector) then it's a fault within the clocks themselves.