View Single Post
Old 09-06-18, 01:59 PM   #1
whysub
Guest
 
Posts: n/a
Default Curvy Chain Adjusters That Don't

My chain is a bit slack on my 1999 650S. Loosening the rear nut was a pain, so pushed out the rear spindle and greased it all up, so it goes in (and comes out) far easier. Wheel moves around when spindle is out fine and as it should.

However, totally baffled by the adjusters, as they do nothing. Took the single allen bolt out of the end of the swing arm on both sides and greased them up but they don't do anything. Do these push on the spindle, moving it forward to slacked the chain, and move back so the wheel can be pulled back to tighten the chain?
  Reply With Quote