SV650.org - SV650 & Gladius 650 Forum - View Single Post

maviczap · 15-08-16, 06:40 AM

If the exhaust isnt leaking, then dont worry about it too much. Part of the casting has cracked and broken off, maybe someone lumped it with a hammer at some point?

If at some point you remove the exhaust or it gets worse, then get it fixed, it'll need someone with specialist welding kit.

Those ehaust header nuts look like they are going to be a ******* to get off without breaking the studs off, a common problem. If it aint broke leave alone, but you could get both done at the same time in the future.

Its ok as it is

15-08-16, 06:40 AM	#2
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,096	Re: Curvy header issue If the exhaust isnt leaking, then dont worry about it too much. Part of the casting has cracked and broken off, maybe someone lumped it with a hammer at some point? If at some point you remove the exhaust or it gets worse, then get it fixed, it'll need someone with specialist welding kit. Those ehaust header nuts look like they are going to be a ******* to get off without breaking the studs off, a common problem. If it aint broke leave alone, but you could get both done at the same time in the future. Its ok as it is __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius Last edited by maviczap; 15-08-16 at 06:41 AM.