View Single Post
Old 11-05-18, 08:45 AM   #3
R1ffR4ff
Member
 
R1ffR4ff's Avatar
 
Join Date: Feb 2017
Location: JAMOADR(1999 Naked Curvy)
Posts: 902
Default Re: Idle adjust cable

When you had the Carbs off did you check the Float heights were in spec?

Have you checked for Carb seals/Air-leaks?Use a bit of Carb Brake cleaner or WD40 sprayed around them and if the engine speed changes you have introduced a leak.Check that the seals in the Air-box have seated correctly onto the carbs.

Although this is one of my old CX500 pages some of the information is relevant for all CV carbs,

https://cx500.000webhostapp.com/CarbMain.html
__________________
"The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails."

Last edited by R1ffR4ff; 11-05-18 at 08:48 AM.
R1ffR4ff is offline   Reply With Quote