[SV650rules]

I always start high on mower to trim the tops off, and then work down to about 40mm, never cut grass down lower than that anyway with the kind of rye grass mix we have, you can go lower if you have some fine fescue grass ( like bowling greens or Wimbledon LOL ) but does not pay to cut too short. 'A little and often' is good advice for lawns as the grass grows more densely if it is taught how long you want it to be.. Just got the dremel out and touched up the edge of the mower blade, a sharp blade gives a nicer cut ( does not just knock the grass over ) and gives the engine or leccy motor an easier time as well.