SV650.org - SV650 & Gladius 650 Forum - View Single Post - K1 starts but cuts out after a second or two.

netsurfer · 26-05-18, 04:56 PM

It’s surprisingly easy, it appears daunting at first glance!

I’ve got the carbs off mine (a K1) put them on and taken them off again without issue.

Once the tank and airbox is off the maze of pipes and cables looks scary, but just work through them one by one and take photos if not sure. Routing is important and that’s what caused me a bit of an issue but a few photos will avoid that for you.

Remember to plug the inlets with plastic bags or clean rags after the carbs are off as you will cause yourself 10 times the work if something drops in there.

I have a Haynes manual here so feel free to drop me a dm if you need to see it.

Cheers and good luck!

Sent from my iPhone using Tapatalk

26-05-18, 04:56 PM	#6
netsurfer Member Join Date: Apr 2018 Location: N.Ireland Posts: 40	K1 starts but cuts out after a second or two. It’s surprisingly easy, it appears daunting at first glance! I’ve got the carbs off mine (a K1) put them on and taken them off again without issue. Once the tank and airbox is off the maze of pipes and cables looks scary, but just work through them one by one and take photos if not sure. Routing is important and that’s what caused me a bit of an issue but a few photos will avoid that for you. Remember to plug the inlets with plastic bags or clean rags after the carbs are off as you will cause yourself 10 times the work if something drops in there. I have a Haynes manual here so feel free to drop me a dm if you need to see it. Cheers and good luck! Sent from my iPhone using Tapatalk