Quote:
Originally Posted by Bunkle
I've got a fire blade seat unit too.
I did gave an M1 fairing but since I've swapped the front end for a Gsxr k5 set up I'll be fitting 675 fairings.
Any tips? I'll need to make up some brackets if you wouldn't mind showing me any templates?
|
675 fairings, haaa good luck.
its a ******* to fit depending on the exhaust system you are using and how much cutting you want to do, ive got the TT version of the fairing, the way ive mounted means I can use the top radiator mount points to hold the upper fairing (just using some ally strips i got from a bellypan fitting kit, works well, ive not had to cut around the bars (some other have where they make it sit lower) but at the bottom ive had to cut a fair bit and create a trench as my exhaust is twin barrel instead of shotgun which has been annoying. Some people have mounted the fairing so low that they can not use a headstock lift without it pushing on the fairing. From what ive read there are many variants of the fairing and none are the same fitment.
http://forums.sv650.org/showthread.php?t=153136&page=12