SV650.org - SV650 & Gladius 650 Forum - View Single Post - Kawasaki Ninja ZX10R 2006 2007 (Fits pointy SV) Rear Shock

Adam Ef · 04-02-19, 05:03 PM

Ah Good! It's a very easy fit. A small bit of redundant plastic to unscrew from the undertray / toolkit box and it fits right in. Fowlers will get you the Kawasaki lower bolt and nut easily if you need it. I'll leave compression, rebound and preload set how I had it for my SV so you've got a starting point. It raises the back very slightly and makes it tip in really well. I've adjusted the other shock I've got to be exactly the same.

There's a really good thread on the SV Rider forum with a guide to fitting that I linked to in the listing. It's very straight forward and a huge improvement to comfort and handling.

04-02-19, 05:03 PM	#5
Adam Ef Member Mega Poster Join Date: Dec 2015 Location: Bristol Posts: 1,200	Re: Kawasaki Ninja ZX10R 2006 2007 (Fits pointy SV) Rear Shock Ah Good! It's a very easy fit. A small bit of redundant plastic to unscrew from the undertray / toolkit box and it fits right in. Fowlers will get you the Kawasaki lower bolt and nut easily if you need it. I'll leave compression, rebound and preload set how I had it for my SV so you've got a starting point. It raises the back very slightly and makes it tip in really well. I've adjusted the other shock I've got to be exactly the same. There's a really good thread on the SV Rider forum with a guide to fitting that I linked to in the listing. It's very straight forward and a huge improvement to comfort and handling.