Re: What have you tinkered with today?
On the plus got my ZX10 shock fitted and stripped and greased all the roller bearings.
On the negative i thought while I was at it I might as well take the swing arm off and do those bearings. So I set about removing the exhaust which turns out to be an impossible task. The bolt under the side stand wouldn't come out and I had to hacksaw it. Then the front pipe join wouldn't come apart so I thought I would just remove the front header pipe and both the hex bolts have snapped off in the head, bugger. And to top it all off the sprocket carrier bearing has collapsed and needs replaced.
|