SV650.org - SV650 & Gladius 650 Forum - View Single Post - Exhaust Rattle

R1ffR4ff · 22-01-18, 03:53 PM

This is the thread that led me to fit my Cheap Slip-on,

http://forums.sv650.org/showthread.php?t=227836

and I bought this for 30 quid-ish

https://tinyurl.com/y9lyteuv

I also bought the little,"Fuel Brand" link pipe(£14) and as my Curvy needed an extra little 30 Deg bend pipe I also bought this,

http://www.ebay.co.uk/itm/Jetex-Mand...item566a36584b

I had to do a bit of hack sawing and make my own slits at the Can end I recall and hack off the Lug things off the Slip-on and discard the inner sleeve thing that came with the slip-on.Not a hard job once I figured out what needed to be done.

Here's what it sounds like with the Baffle in.I didn't want it any louder,

https://app.box.com/s/50v1t40uzq6mayvxq6edm7cavzd3nxk6

Note:The baffle was only held in with a self tapper and I blew it out<grin> so refitted using an M6 nut and bolt.All solid now

22-01-18, 03:53 PM	#15
R1ffR4ff Member Mega Poster Join Date: Feb 2017 Location: JAMOADR(1999 Curvy) 36,000 miles Posts: 1,429	Re: Exhaust Rattle - how to stop? This is the thread that led me to fit my Cheap Slip-on, http://forums.sv650.org/showthread.php?t=227836 and I bought this for 30 quid-ish https://tinyurl.com/y9lyteuv I also bought the little,"Fuel Brand" link pipe(£14) and as my Curvy needed an extra little 30 Deg bend pipe I also bought this, http://www.ebay.co.uk/itm/Jetex-Mand...item566a36584b I had to do a bit of hack sawing and make my own slits at the Can end I recall and hack off the Lug things off the Slip-on and discard the inner sleeve thing that came with the slip-on.Not a hard job once I figured out what needed to be done. Here's what it sounds like with the Baffle in.I didn't want it any louder, https://app.box.com/s/50v1t40uzq6mayvxq6edm7cavzd3nxk6 Note:The baffle was only held in with a self tapper and I blew it out<grin> so refitted using an M6 nut and bolt.All solid now __________________ "Stultus est sicut stultus facit" Last edited by R1ffR4ff; 22-01-18 at 03:59 PM.