View Single Post
Old 11-06-18, 06:21 PM   #12
R1ffR4ff
Member
Mega Poster
 
R1ffR4ff's Avatar
 
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,427
Default Re: Rattle can spraying

Quote:
Originally Posted by proze View Post
I normally use acetone as the last step before primer. Is that correct?
Acetone is an excellent pre-spray wipe.

Just prior to spraying we use,"Tac-Cloths" once cleaned,

https://www.toolstation.com/shop/Pai...+Cloths/p27935


to make sure there's no dust or debris on the Surface.Lightly run across the surface.You can get quite a bit of life out if them on small jobs like these by using one side of them and then unfolding and then using the other side.


Here's how one of my old CX500 rebuilt engines looked after I'd re-painted it using Plastikote High Temp Satin Chrome domestic Radiator paint which is an Excellent High temp paint.Bigger picture of my present Avatar.


__________________
"Stultus est sicut stultus facit"

Last edited by R1ffR4ff; 11-06-18 at 06:32 PM.
R1ffR4ff is offline   Reply With Quote