SV650.org - SV650 & Gladius 650 Forum - View Single Post - Gear change problem-can't get past 2nd gear

muzikill · 11-09-07, 07:25 PM

It goes solid with the clutch lever in ready to engage as i said i can select 1st 2nd and neutral without any problems, the engine is running fine it's just trying to get it above 2nd in the sequential process, btw a new clutch cable was fitted recently and the clutch / gear selector mechanism was adjusted.....i wonder if its the gear selector thats gone! it's at its top limit thinking no more gears to select?

11-09-07, 07:25 PM	#3
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: Gear change problem-can't get past 2nd gear It goes solid with the clutch lever in ready to engage as i said i can select 1st 2nd and neutral without any problems, the engine is running fine it's just trying to get it above 2nd in the sequential process, btw a new clutch cable was fitted recently and the clutch / gear selector mechanism was adjusted.....i wonder if its the gear selector thats gone! it's at its top limit thinking no more gears to select? __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. Last edited by muzikill; 11-09-07 at 07:30 PM.