Bit of an update, but first a fancy pic down a cobbled lane!
Shortly after this i decided to add some yellow tint...
Then i decided the stainless bolts needed to be black...
Then i decided a ride out to Wells was in order
And now I've started working on the next mod... A swingarm mounted shock.
Below are some screen grabs of the mech (still need to add some additional fixings but you get the jist!), along with it shown on the bike. Excuse poorly draw shock, i only did enough to get the dimensions for mech.
This will free up space (where the stock shock location is) to route a 2-2 exhaust up between the rear of the engine and the swingarm.
Exhaust exit like this...
And pics of the mech...