14-05-18, 02:48 PM
|
#5
|
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,429
|
Re: Crankcase breather 'sponge'
Quote:
Originally Posted by Craig380
Just use warm soapy water (washing up liquid or similar), squeeze it gently dry-ish in an old bit of cleanish rag and refit.
It actually doesn't need to be cleaned as such, its purpose is to trap oil droplets coming from the crank breather so that they don't contaminate the air filter element too much. When enough oil is trapped, it will drip back down the breather tubes. You can also just gently squeeze the oil out of it into kitchen paper etc without washing it.
|
+10
__________________
"Stultus est sicut stultus facit"
|
|
|