SV650.org - SV650 & Gladius 650 Forum - View Single Post

Jacobus · 20-10-16, 01:29 AM

Frame by Jacob Martin, on Flickr
750 SRAD Triple came in today. My first tip for those doing a front swap is, alot of triples on eBay are listed fitting both 600 750 SRAD. This is misleading. The 750 has upside down forks and the 600 does not. I had to order another set because the first set came in and has 45 mm openings obviously for the 600. 50 mm is what's needed for the top. The 750s came in today, and I still have to ship the 600s back.

The top triple had black carbon fiber glued to it. I removed it with a putty knife and started sanding the glue off. I'll probably keep sanding with higher grits to get a Polish, to see how I like that.

Zorran's upper Bearing from TWF Racing fits like a champ. Mates up with the stem and Triple perfectly.

20-10-16, 01:29 AM	#12
Jacobus Member Join Date: Oct 2016 Location: Arkansas Posts: 99	Re: Building From the Ground Up Frame by Jacob Martin, on Flickr 750 SRAD Triple came in today. My first tip for those doing a front swap is, alot of triples on eBay are listed fitting both 600 750 SRAD. This is misleading. The 750 has upside down forks and the 600 does not. I had to order another set because the first set came in and has 45 mm openings obviously for the 600. 50 mm is what's needed for the top. The 750s came in today, and I still have to ship the 600s back. The top triple had black carbon fiber glued to it. I removed it with a putty knife and started sanding the glue off. I'll probably keep sanding with higher grits to get a Polish, to see how I like that. Zorran's upper Bearing from TWF Racing fits like a champ. Mates up with the stem and Triple perfectly. Last edited by Jacobus; 23-09-17 at 04:46 PM.