SV650.org - SV650 & Gladius 650 Forum - View Single Post

23-02-19, 07:46 AM

I've just swapped the oil lines on my K6 for an aftermarket kit, only the long line had failed, I took the opportunity to fit another oil cooler I'd previously cleaned up at the same time. These bits are left over and and free to a good home should anyone need them:

Oil cooler: needs a clean up but worked fine on the bike before the swap. The small bracket at the bottom that the protective mesh screws on has fallen off.

Short oil line: this also worked fine, according to the bike's service records this is a newer part.

These are free if anyone wants to collect them (NN18 ).

£0.00

Alan

23-02-19, 07:46 AM	#1
Othen Guest Posts: n/a	K6 Oil Cooler and Oil Pipe I've just swapped the oil lines on my K6 for an aftermarket kit, only the long line had failed, I took the opportunity to fit another oil cooler I'd previously cleaned up at the same time. These bits are left over and and free to a good home should anyone need them: Oil cooler: needs a clean up but worked fine on the bike before the swap. The small bracket at the bottom that the protective mesh screws on has fallen off. Short oil line: this also worked fine, according to the bike's service records this is a newer part. These are free if anyone wants to collect them (NN18 ). £0.00 Alan Last edited by Othen; 23-02-19 at 07:49 AM.