SV650.org - SV650 & Gladius 650 Forum - View Single Post

Bibio · 21-05-18, 01:56 PM

back off the clutch lever adjuster till you get your slack back.

clutch mantra is easier than the guide on here.
simple:
put lever adjuster at mid way.
tighten middle screw till touching.
lock the nut keeping the screw in the same place.
adjust clutch bite at lever adjuster.

yes its that easy, no need to pizz with 1/4 turn out and all that.

remember that the spring retainer goes on top of the mech.

21-05-18, 01:56 PM	#2
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: 99 sv650n worm drive failure? back off the clutch lever adjuster till you get your slack back. clutch mantra is easier than the guide on here. simple: put lever adjuster at mid way. tighten middle screw till touching. lock the nut keeping the screw in the same place. adjust clutch bite at lever adjuster. yes its that easy, no need to pizz with 1/4 turn out and all that. remember that the spring retainer goes on top of the mech.