View Single Post
Old 23-04-18, 01:48 AM   #98
Jacobus
Member
 
Jacobus's Avatar
 
Join Date: Oct 2016
Location: Arkansas
Posts: 99
Default Re: Building From the Ground Up

After much pain (literally) and deliberation, I decided to ditch the clipons and fab up some old man handle bars.

As you may know bolting on a SRAD triple with risers isn't available. So they have to be fabbed up. So I ordered another SRAD triple top clamp, some generic risers and 27 x 7/8 handlbars, and a longer set of cables.

The SRAD triple is very thin so i cut out some 1/4" steel and Jb weld it inside the bottom cavities. Drilled my holes, and mounted my risers. Next I extended my cables, bled my brakes, and spliced my eletrical. Im so thrilled and could be happier with it. I can ride so much longer now. If your thinking about doing it, stop thinking and do it. Only thing worse is the wind blast to the chest.

Risers by -Ransome-, on Flickr
__________________
~Jacob


SICK50 Build Thread
BULLDOG Build Thread

Last edited by Jacobus; 23-04-18 at 06:38 PM.
Jacobus is offline   Reply With Quote