SV650.org - SV650 & Gladius 650 Forum - View Single Post

21-03-17, 09:54 AM

Had 20mm risers fitted yesterday. The standard clutch cable is not long enough to accommodate this change so we fitted a clutch cable from a dl650. This cable has a little too much length but by running it round the right hand side of the ignition barrel we lost the extra. The only slight issue if one is really picky is that the cable very slightly obstructs access to the ignition switch but it is very slight indeed. This may be useful to anyone considering doing the same.

Geoff.

P.S. also had the Suzuki rack and top box fitted, good but be aware that the fitment of the rack requires sections to be cut from the bodywork.

21-03-17, 09:54 AM	#1
macamxthe1st Guest Posts: n/a	Bar risers to a L7 Had 20mm risers fitted yesterday. The standard clutch cable is not long enough to accommodate this change so we fitted a clutch cable from a dl650. This cable has a little too much length but by running it round the right hand side of the ignition barrel we lost the extra. The only slight issue if one is really picky is that the cable very slightly obstructs access to the ignition switch but it is very slight indeed. This may be useful to anyone considering doing the same. Geoff. P.S. also had the Suzuki rack and top box fitted, good but be aware that the fitment of the rack requires sections to be cut from the bodywork. Last edited by macamxthe1st; 21-03-17 at 10:11 AM.