SV650.org - SV650 & Gladius 650 Forum - View Single Post

aesmith · 13-01-20, 02:21 PM

You could try a bolt and nut through the disconnected banjo end, with washers either side. You don't need the seal to be perfect, as long as it allows some pressure be developed for a second or so.

13-01-20, 02:21 PM	#71
aesmith Member Join Date: Mar 2013 Location: Aberdeenshire Posts: 966	Re: Will an R1 front master cylinder fit? You could try a bolt and nut through the disconnected banjo end, with washers either side. You don't need the seal to be perfect, as long as it allows some pressure be developed for a second or so.