SV650.org - SV650 & Gladius 650 Forum - View Single Post

DamoK4 · 13-01-20, 06:20 PM

I took the caliper into work and got it off with an air line. Was really easy actually. I opened the bleed valve and put a tight bit of hose on it, pushed the other end on a air gun. Had to put a bolt in the banjo hole to block it and they popped out. Had a piece of wood where the brake disc would be so they came out level. Just need to press the sliding pin out on this one now.

13-01-20, 06:20 PM	#72
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Will an R1 front master cylinder fit? I took the caliper into work and got it off with an air line. Was really easy actually. I opened the bleed valve and put a tight bit of hose on it, pushed the other end on a air gun. Had to put a bolt in the banjo hole to block it and they popped out. Had a piece of wood where the brake disc would be so they came out level. Just need to press the sliding pin out on this one now.