BigTon

Thanks for all your advice

I have checked all the connectors on the loom that I can see and they’re all spotless. I’ve also checked and can’t see any breaks in the harness either.

Battery is reading 13v

I tried a new ignition switch which made no difference at all.

I’ve tested the turn signal relay and diodes which appear to be working correctly.
I’ve been following your advice working my way along the harness and checking connectors but getting a little confused along the way.
But I noticed that there is 13v going to the meter fuse (3?) but only when the ignition is off. Once the ignition switch is ON I can’t find any power at the fuses. That can’t be right?

Also, how the hell do I get the ground that’s in behind the swing arm? That’s the only one I haven’t checked due to firstly not being able to find it and secondly not being able to access it!

A local garage told me the dancing needles and flashing lights sounds like an ICU fault. There’s no way of testing that unit but should I still have ignition lights if it were faulty? Same with R/R?


Sent from my iPhone using Tapatalk