SV650.org - SV650 & Gladius 650 Forum - View Single Post - Cleaning the carbs and adjusting the valves

5hort5 · 18-03-10, 10:16 PM

I did the valves on my first DIY go as I wanted to do the front CCT and I had no mechanical experience and it was ok with help from here and the manual, although I knackered my carbs when trying to clean the float bowls, still don't know what I did and replaced em with another set. So it can be done but you'll learn as you go along if you know what I mean

18-03-10, 10:16 PM	#3
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Cleaning the carbs and adjusting the valves I did the valves on my first DIY go as I wanted to do the front CCT and I had no mechanical experience and it was ok with help from here and the manual, although I knackered my carbs when trying to clean the float bowls, still don't know what I did and replaced em with another set. So it can be done but you'll learn as you go along if you know what I mean