Quote:
Originally Posted by Tomjohnson
Ah brilliant would you guys be able to send me a picture of the plugs for the neutral, clutch position and side stand
|
The simple answer is no. Not because we are churlish but because I'm not sure they exist. We would normally follow the wiring from the existing switch to the loom. Here's a link to the gen2 service manual:
https://www.manualslib.com/manual/80...i-Sv650-S.html
There are snippets of info that may help. Here's a picture of the main wiring harness from Fowlers fiche:
https://www.fowlersparts.co.uk/parts...v650k5k6uk5uk6
Item #17 is the sidestand switch
The neutral switch is harder since it's part of the gearbox diagram and it only shows the switch:
https://www.fowlersparts.co.uk/parts...g-model-k5k6k7
Item #39 is the neutral switch.
The clutch switch sits on the left handlebar (duh!) because it's operated by the clutch lever but I can't find a link to that harness.
The only other suggestion I have is to investigate the race harness which some people use on their race bikes to eliminate the road stuff they don't need:
https://lwtracer.com/lwt-racing-bike...2nd-gen-03-06/
This is the wiring diagram in case you don't have one: