Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Not on an SV, but a cbr600rr. Under heavy braking, typically at lower speeds in the 40-0mph range the front will judder a bit, feels like a rattle through the forks. If I release and reapply it goes away usually but is pretty odd.
I've not had the brakes off yet but pads are fine (tyres changed recently and they had a look) and discs don't appear to be warped. |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]()
I had exactly the same, my forks were bottoming out.
What weight are you? I weight 12.5st and my preload had to be wound 15 clockwise of it's 16 adjustments before it was right.
__________________
6.67300 × 10-11 m3 kg-1 s-2 |
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]()
Forgot to say that's on a 600rr too.
Other things I did at the same time were clean all the brakes up including caliper pistons and making sure the floating discs are actually floating by cleaning the washers. 99% put my money on the forks bottoming like mine were though.
__________________
6.67300 × 10-11 m3 kg-1 s-2 |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Thanks buddy. I'll check they're not bottoming out but I don't think they are. I'm about the same weight as you but my suspension settings are all stock, unless someone wound them all the way around? Don't know if that's even possible.
It's about time I had the brakes off anyway so I'll check preload first and then give the brakes a clean up. |
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]()
If it's still on stock settings then it probably is lacking preload for your weight by a fair bit.
Stick a cable tie on the stanchion and after hard riding with heavy braking it need to finish at 33mm, at 27mm from the bottom the forks are bottoming out.
__________________
6.67300 × 10-11 m3 kg-1 s-2 |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
can you get the RR with abs?
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
Apparently after a quick Google search, ABS has been available on the RR since last year.
|
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
reason i suggest this, have a friend whos dad has one of the new tiger 1050's it has abs, and when it kicks in it sounds awfully like what sauluk has described
|
![]() |
![]() |
Thread Tools | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Juddering? | sookie | Bikes - Talk & Issues | 50 | 06-11-09 04:56 PM |
Brake light switch sticking on with front brake | rick0361 | SV Talk, Tuning & Tweaking | 6 | 11-06-09 06:20 PM |
K3 front brake lever, Front indicator (RH), Front Mirror(RH), Bar End (RH) | leegriffiths128 | Stuff Wanted | 0 | 23-07-08 09:11 PM |
Front brake not activating brake light properly | SVeeedy Gonzales | SV Talk, Tuning & Tweaking | 5 | 27-02-07 12:09 PM |
brake light flickers when the front brake pulled in - K4 | dclifford | SV Talk, Tuning & Tweaking | 9 | 05-09-05 10:39 AM |