SV650.org - SV650 & Gladius 650 Forum



Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola!
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 01-05-13, 08:22 PM   #1
dazzaboy
Guest
 
Posts: n/a
Default Meta alarm fob programming?

Replaced the battery on my sv's meta alarm key remote today and now it won't work, The red light on the fob is flashing but i have test the fob and its not sending out any signal. Is there anyway i can programme it, seems strange that the fob is'nt sending out any signal. I have no second fob and no card with a key code.
  Reply With Quote
Old 01-05-13, 09:58 PM   #2
Skybaba
Guest
 
Posts: n/a
Default Meta Alarm Fob Programming

My bike and I are currently sitting on a tow truck cos of a similar issue!!!

I accidentally turned on the parking light when I parked the bike at work yesterday so the battery was flat when I got to the bike. Had to get AA to start the bike off a battery pack.

I rode 50+ miles back home and another 50+ miles back to work this morning and the alarm fob worked without issue last night and this morning; however after getting off work this evening, I couldn't get the fob to disarm the alarm.

The light on the fob comes on each time I press it but the alarm isn't responding.

I think it's time I removed this alarm!!!!!
  Reply With Quote
Old 02-05-13, 06:42 AM   #3
dazzaboy
Guest
 
Posts: n/a
Default Re: Meta Alarm Fob Programming

Yh bloody things!! I bypassed the alarm ignition switch wires so i could ride it home but need to get it done properly or get this one sorted. All the wiring is there but cant find a new unit the same unless i can get thing one working. Gonna phone an alarm shop later so i'll let you know what happens. Hope i dont have to remove the alarm as there is alot of wires "/
  Reply With Quote
Old 02-05-13, 03:31 PM   #4
Skybaba
Guest
 
Posts: n/a
Default Meta alarm fob programming?

Hey Dazza,

I went through the docs I got when I bought my bike and found the Datatool installation certificate and the user manual; mine is a Datatool Veto Evo installed in 2000.

The certificate gave specific details about where the fuse, alarm, siren, trigger switch and wires were installed.

The user guide gave specific troubleshooting steps to follow if the alarm doesn't disarm:

- check alarm fuse
- check you're within range (10m max)
- check ignition is in OFF position
- check transmitter battery
- check that the transmitter signal is correctly aligned with the control unit by pressing the O and Triangle buttons simultaneously for 5 secs

I jumped in the car and headed to the dealer where the recovery truck dropped the bike and asked them for the keys.........I jumped straight to the fifth step and the alarm responded!!!

So looks like I'm all sorted! I need to get back there to pick the bike later today so my planned trip to Wales tomorrow is back on course!!!

Cheers.
  Reply With Quote
Old 02-05-13, 07:00 PM   #5
dazzaboy
Guest
 
Posts: n/a
Default Re: Meta alarm fob programming?

Hey, yh i went to the alarm shop today and he said to try that or try holding the buttons in for 30 seconds so gonna give that a go. If not then i can buy a new unit which will plug straight in for my old one which will save re wiring but its £150 for a new one from them or about £90 off ebay. Gonna have a play at the weekend and see if i can fix it but if not then im gonna have to part with some cash

Glad you got yours working and enjoy your trip
  Reply With Quote
Old 06-05-13, 06:54 PM   #6
Skybaba
Guest
 
Posts: n/a
Default Meta alarm fob programming?

Quote:
Originally Posted by dazzaboy View Post
Glad you got yours working and enjoy your trip
Thanks and I certainly enjoyed it

Quote:
Originally Posted by dazzaboy View Post
Gonna have a play at the weekend and see if i can fix it but if not then im gonna have to part with some cash
Did you have any luck fiddling with it?
  Reply With Quote
Old 06-05-13, 07:08 PM   #7
dazzaboy
Guest
 
Posts: n/a
Default Re: Meta alarm fob programming?

aint got it working yet but it was only running on one cylinder since removing alarm unit and had to trace wiring back and remove the coil wire from alarm wiring but it only affected the rear cylinder not both which i found very strange, but atleast i can use it for now
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Meta alarm Icanopit Bikes - Talk & Issues 6 10-11-09 11:29 PM
what alarm should i get datatool or meta zsv650 SV Talk, Tuning & Tweaking 24 23-09-08 10:52 PM
Meta Alarm Technician plowsie Bikes - Talk & Issues 3 31-05-07 09:12 PM
alarm fuse meta v2 catmad SV Talk, Tuning & Tweaking 1 17-01-07 04:19 PM
Meta Alarm Help!!! Samurai Bikes - Talk & Issues 5 09-02-06 02:52 PM


All times are GMT. The time now is 07:13 PM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.