Semi Dead Bike

[TSM]

Well just geting some ideas so when i get home i can sort this out properly.

Basicly i have no speedo/tacho/indicators/horn, everything else headlight/pass&highbeam/starter works and bike starts fine.

I have checked the 3 connectors for the front loom and they seem fine, i am thinking either loose connection behind headstock for the ignition switch part of the loom or a multiple blown fuse situation.

I did lift the tank on the weekend and also the front seat, but it was working after and i went on a ride. I will do a better check when i get home.

Check the loom just under the seat, that's were mine frayed and cause similar problems

Originally Posted by TSM

Well just geting some ideas so when i get home i can sort this out properly.

Basicly i have no speedo/tacho/indicators/horn, everything else headlight/pass&highbeam/starter works and bike starts fine.

I have checked the 3 connectors for the front loom and they seem fine, i am thinking either loose connection behind headstock for the ignition switch part of the loom or a multiple blown fuse situation.

I did lift the tank on the weekend and also the front seat, but it was working after and i went on a ride. I will do a better check when i get home.

Ok, this might sound drastic, but its a 3 step program:

1) Undo every bolt on your machine, remove all major components.

2) Put all components on ebay.

3) Buy something that is in once piece?

Dan

[TSM]

Originally Posted by Sudoxe

Ok, this might sound drastic, but its a 3 step program:

1) Undo every bolt on your machine, remove all major components.

2) Put all components on ebay.

3) Buy something that is in once piece?

Dan

I have considered it.

[TSM]

Phew, it was the signal fuse in the end. It was the first thing i tested. Why it went i dont know though.

While i was at it i also sorted out the rear brake switch and put two leds in the rear tail light for the number plate, it does not light it that well though, mabey another 2 at a later date.