SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
What's the best method of locking up the engine/ transmission so that I can undo and torque up the front sprocket nut?
. |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
make sure your chain is still on, the bike is on its back wheel and someone is on the rear brake or if your on yer own use a 1/4 drive extention bar to keep back brake jammed on, then get a 32mm socket and a long tommy bar and unscrew it will be tight just persist
|
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Aug 2003
Location: HomeBound
Posts: 3,302
|
![]()
Get yourself a 12V impact gun.
Mine was £12 or £14 from Halfords. Bike left in Neutral while using that. Just co-incidence but the Max torque of mine IIRC is about the same as stated in manual for the front sprocket. Ben |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Or put a peace of 4x2 through the wheel so it rests on the swing arm and stops it turning!!
|
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
I could only remove it with an impact gun, a 1m bar extention on the socket was useless...
|
![]() |
![]() |
Thread Tools | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Changing rear sprocket for better acc, curvy | Cursio | SV Talk, Tuning & Tweaking | 22 | 05-02-09 11:53 AM |
Changing front end. | juggler | SV Talk, Tuning & Tweaking | 5 | 27-06-08 04:59 PM |
Does my sprocket need changing? | branny | SV Talk, Tuning & Tweaking | 64 | 20-02-06 04:09 PM |
Changing Front Sprocket. | Scoobs | SV Talk, Tuning & Tweaking | 16 | 01-09-05 06:28 PM |
Changing the rear sprocket - advice | bendelfont | SV Talk, Tuning & Tweaking | 3 | 01-07-05 10:02 PM |