SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
hi all,
after getting the bike cleaned up and new tyres fitted ready for some better weather i've noticed a problem with gear changes. when the bike it doesnt want to go from 1st up to neutral. it jumps 1st to 2nd. now taking the bike out on saturday this was intermitent. its not me being heavy with changes either it just jumps past neutral and goes into 2nd. now if i turn the engine off and put the ignition on (but not staring the bike) it pops perfectly from neutral down to first and then back to neutral again. could the lever just be stiff after sitting for most of winter? could something need adjusted? if so would i be able to fix it myself or best to go to a garage?? oh and its an '06 pointy! with just aout 5k on the clock |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
Hi,
I had this problem with mine and I found making a small adjustment with the clutch fixed the problem for me, hth Richard |
![]() |
![]() |
#3 |
No, I don't lend tools.
Mega Poster
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
|
![]()
Search my name and clutch adjustment.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" |
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2003
Location: Warwickshire
Posts: 2,802
|
![]()
That sounds almost biblical!
![]()
__________________
"Artificial Intelligence is no match for natural stupidity" |
![]() |
![]() |
![]() |
#5 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Lol all hail the prophet sid.
![]() Maybe an oil change would be a good idea, since it's been stood over winter. (you poof ![]()
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
it was serviced just before going into the shed. me thinks time i got some spanners and had a go myself!!!
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gear Shift Rod bent - Gear Changing problem | Thaleshwar | SV Talk, Tuning & Tweaking | 13 | 05-06-10 06:28 PM |
Clutch Problem? Cutting off when releasing clutch in first gear! | puthsardarade | SV Talk, Tuning & Tweaking | 15 | 09-01-08 09:42 PM |
Gear/Clutch problem on new SV | Dee4Life | SV Talk, Tuning & Tweaking | 7 | 06-12-06 11:52 AM |