Bellypan fitting, question

Hi guys, i got £250 in vouchers from work for Busters and i plan on buying a pan but have to take the vouchers to busters (i could post them but i fancy a rideout and it'll save on posting the vouchers by special delivery and paying for the goods to be delivered back).

I plan on getting a belly pan for the sv. What tools will i need to take with me to fit the pan to my bike there and then? Is it just a socket set or something more? If it's any help i'm looking at Powerbronze one.

Powerbronze website doesn't say but there's a guide from google for fitting a pan to a SVthou and it is undo a couple of crankcase bolts and rad cooler bolts to bolt the pan to.

only needed a wee socket set

need allen keys too. Just saves me risking putting plastic in a bag . Cheers. Only talking 10,12mm ish sockets. I'll take a 3/8" set with me and allen keys.

[yorkie_chris]

Make sure you have the small stuff with you too. 8mm socket for the engine cases (in 1/4" drive) especially.

Originally Posted by yorkie_chris

Make sure you have the small stuff with you too. 8mm socket for the engine cases (in 1/4" drive) especially.

Nope allen keys as i have stainless kit from chewys which is 5mm allen key i think off the top of my head.

[yorkie_chris]

Ah ok, in that case make sure you take a 5mm allen key or bit then

if it's the same as the 650 one it's dead simple takes about 10 mins to fit.