SV650.org - SV650 & Gladius 650 Forum



Stuff Wanted Looking for SV bits, nothing in For Sale? Place a plea here.

Reply
 
Thread Tools
Old 19-02-10, 01:29 PM   #1
ophic
Member
Mega Poster
 
ophic's Avatar
 
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
Default Lower fairing fitting kit (for pointy)

Long shot, but does anyone have the bag of bits required to fit lower fairings to a pointy? Or know where I can get one for a reasonable price?

Cheers

Bob
__________________
Silver SV650SK3, Fuel exhaust
ophic is offline   Reply With Quote
Old 19-02-10, 02:34 PM   #2
Mr_Chin
Guest
 
Posts: n/a
Default Re: Lower fairing fitting kit (for pointy)

Somehow, I've noticed that you have been after silver lowers for a long time now. Have you now got yourself some?
These fitting kits are like gold dust BTW - but you know that! But a month or so ago, IIRC, a brand new full set of lower fitting brackets went on Egay for £32 with only 6 bids.

Robinsons Foundry do the sets, but they're £114 .

Chin
  Reply With Quote
Old 19-02-10, 03:16 PM   #3
ophic
Member
Mega Poster
 
ophic's Avatar
 
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
Default Re: Lower fairing fitting kit (for pointy)

I've got some - they aint silver, but I have a local spray shop that should be able to sort that

But no fitting kit. I have some R&G crash bungs that fit a faired bike and, I think, replace the large middle bracket - but none of the other bits. I was hoping someone might have some bits they're willing to part with - or send pictures of where and how they fit to so I can fabricate some.

Then when it all goes wrong, I can just buy the hideously priced fitting kit with my head held high, knowing that - at least I tried
__________________
Silver SV650SK3, Fuel exhaust
ophic is offline   Reply With Quote
Old 19-02-10, 03:21 PM   #4
Mr_Chin
Guest
 
Posts: n/a
Default Re: Lower fairing fitting kit (for pointy)

Nice!
If you have R&G's, then you don't need the fitting kit IMO. The bottom brackets are just straight bits of metal with a nut and bolt through them. Put the lowers on to see how long they need to be and drill the holes.

Just so you know, the OEM belly pan kit uses the same two lower brackets used in the lower fairing bracket kit.

HTH

Chin
  Reply With Quote
Old 19-02-10, 03:24 PM   #5
ophic
Member
Mega Poster
 
ophic's Avatar
 
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
Default Re: Lower fairing fitting kit (for pointy)

Thanks Chin!

Is there a bracket that goes to the radiator?
__________________
Silver SV650SK3, Fuel exhaust
ophic is offline   Reply With Quote
Old 19-02-10, 06:12 PM   #6
Mr_Chin
Guest
 
Posts: n/a
Default Re: Lower fairing fitting kit (for pointy)

Quote:
Originally Posted by ophic View Post
Thanks Chin!

Is there a bracket that goes to the radiator?
Yes there is, but just by having a 'wild guess' that you have a K3 (sigs help - don't they?), means no - YOU don't. The K3's have a radiator that sticks out more than motosliders or R&G's - I had a K3, so know this first hand!. The lowers will bolt straight onto the side of the rad. Only the K5 onwards uses a C shape bracket, which is about 2cm, the K4 uses a grub spacer, which is about 1cm.

HTH

Chin
  Reply With Quote
Old 20-02-10, 02:21 PM   #7
ophic
Member
Mega Poster
 
ophic's Avatar
 
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
Default Re: Lower fairing fitting kit (for pointy)

Thanks again. We are now in pint owed territory

Just need to find a few bolts, a fabricate 2 bits of metal for the bottom, and source some rubber gromets the right size, as a couple are missing. Oh and some sticky back velcro for the top. That's gonna cost a lot less than £100
__________________
Silver SV650SK3, Fuel exhaust
ophic is offline   Reply With Quote
Old 20-02-10, 08:22 PM   #8
Mr_Chin
Guest
 
Posts: n/a
Default Re: Lower fairing fitting kit (for pointy)

Hi Ophic

I was just in the Garage doing some work to my bike, and guess what?...



















I found a right hand side lower fairing bracket. PM me your address, and I'll send it out to you!

That's nearly two pints owed?

Chin
  Reply With Quote
Old 15-07-10, 08:18 PM   #9
Jackk
Guest
 
Posts: n/a
Default Re: Lower fairing fitting kit (for pointy)

Im in this same position now! Got fairing due to be fitted but cant source a fitting kit for less that 130 quid! Ive got R&G's on my K4 does that mean i dont need a fitting kit?
  Reply With Quote
Old 15-07-10, 09:04 PM   #10
ophic
Member
Mega Poster
 
ophic's Avatar
 
Join Date: Jan 2004
Location: Whyteleafe
Posts: 3,395
Default Re: Lower fairing fitting kit (for pointy)

R&Gs for fully faired SVs replace the large fairing mounts. The other little fiddly bits you still have to source. Bear in mind the standard R&Gs for bikes without lower fairings won't do.

I've yet to fit mine. Need some more parts and I've run out of money to get the lowers sprayed up - something to do with getting stuck on my hols cos of a volcano...
__________________
Silver SV650SK3, Fuel exhaust
ophic is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lower Fairing fitting kit Ally Stuff Wanted 1 22-06-09 01:37 AM
Lower fairing fitting kit. Ally Stuff Wanted 1 15-06-09 09:01 AM
Wanted: Pointy lower fairing fitting kit pookie Stuff Wanted 6 27-08-08 08:15 PM
Fitting lower fairing S k5 - just a small question... Paul the 6th SV Talk, Tuning & Tweaking 3 27-01-08 11:34 PM
lower fairing fitting kit d8mof Stuff Wanted 5 13-03-07 04:49 PM


All times are GMT. The time now is 04:53 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.