Removing 33bhp restrictor - Pointy. - SV650.org

15-01-12, 08:42 PM

How do I remove it of my SV650 k3 pointy?

Got the washers out, where is the stop for it?

It's a alpha restrictor kit

Anyone help?

16-01-12, 04:42 PM

I had the same restrictor kit as you mate once you have taken your washers out, if you look to were your throttle cables go to on your throttle bodies.
there is a cam like object were the cables are if you look near there you will see a different coloured triangular piece of metal says alpha onit youve gotta remove that mate.
you can try and do it in the bike but its hard as F*** i took the throttle bodies of because when the mechanics fit em they loctite them in. take the throttle bodies out put them on their side on the floor and you will see theres 1 screw holding the metal plate there its a posidrive get your screwdriver onit and turn it while your turning it tap (gently) with a hammer. this is why i took them out the bike.
put your throttle bodies back in and bobs your aunty

16-01-12, 07:53 PM

So can that piece be put back in after you take it out?

16-01-12, 08:22 PM

And if you do it while on the bike, do you get from under the air filter box or through the side of the bike?

16-01-12, 08:56 PM

yes the piece can be fitted i saved both washers and the piece. i have a k3 to and you cant get from the bottom and tthe frame is in the way on the side the frame is in the way even with a long screwdriver i couldn't move it thats hy i removed thethrottle bodies

Jayneflakes · 16-01-12, 10:40 PM

I did one a while back and found that we had to remove the throttle bodies, once off though it was a doddle to sort out. Then just bolt them back on and go for an unrestricted ride and feel your bike breath a big deep breath!

16-01-12, 11:01 PM

But you can see it at the side?
How does it work??
I work at a garage so got plenty of tools to try get at it if I can see it :P if I can't I'll just do what you say!

17-01-12, 05:20 PM

yes you can see it through the side and i thought the same as you did I had a long screwdriver through the frame however i just kept rounding the head on the screw so i just ended up taking out the throttle bodies its loads easier to do. on the image attached I have put a red ring were the triangular plate is located. The only purpose it serves is to stop you twisting the throttle all the way around not that you should anyway

17-01-12, 07:55 PM

Can't tell we're on the photo..

17-01-12, 08:38 PM

I need to get the bike out and look, it's parked up and can't see the left side!
Got them washers out that's why I'd rather do it while it's still in the bike and not lift the tank!

Do I remove screw remove stop and put the screw back in?

15-01-12, 08:42 PM	#1
J4M1EK Guest Posts: n/a	Removing 33bhp restrictor - Pointy. How do I remove it of my SV650 k3 pointy? Got the washers out, where is the stop for it? It's a alpha restrictor kit Anyone help?

16-01-12, 04:42 PM	#2
jewkc Guest Posts: n/a	Re: Removing 33bhp restrictor I had the same restrictor kit as you mate once you have taken your washers out, if you look to were your throttle cables go to on your throttle bodies. there is a cam like object were the cables are if you look near there you will see a different coloured triangular piece of metal says alpha onit youve gotta remove that mate. you can try and do it in the bike but its hard as F*** i took the throttle bodies of because when the mechanics fit em they loctite them in. take the throttle bodies out put them on their side on the floor and you will see theres 1 screw holding the metal plate there its a posidrive get your screwdriver onit and turn it while your turning it tap (gently) with a hammer. this is why i took them out the bike. put your throttle bodies back in and bobs your aunty

16-01-12, 08:56 PM	#5
jewkc Guest Posts: n/a	Re: Removing 33bhp restrictor - Pointy. yes the piece can be fitted i saved both washers and the piece. i have a k3 to and you cant get from the bottom and tthe frame is in the way on the side the frame is in the way even with a long screwdriver i couldn't move it thats hy i removed thethrottle bodies

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
33BHP Restrictor (pointy)	jamesterror	Stuff Wanted	2	25-04-09 10:06 PM
33bhp ecu restrictor from K7 pointy	shonadoll	For Sale - SV's and SV related items	2	05-11-08 09:18 PM
Removing the ecu-restrictor from a pointy	shonadoll	SV Talk, Tuning & Tweaking	4	15-10-08 02:58 PM
Pointy 33bhp Restrictor	sunspark4600	Stuff Wanted	1	09-05-08 10:39 PM
33bhp restrictor for K3 pointy for sale	k3lls	For Sale - SV's and SV related items	0	07-09-07 05:39 PM

16-01-12, 07:53 PM	#3
J4M1EK Guest Posts: n/a	So can that piece be put back in after you take it out?

16-01-12, 08:22 PM	#4
J4M1EK Guest Posts: n/a	And if you do it while on the bike, do you get from under the air filter box or through the side of the bike?

16-01-12, 11:01 PM	#7
J4M1EK Guest Posts: n/a	But you can see it at the side? How does it work?? I work at a garage so got plenty of tools to try get at it if I can see it :P if I can't I'll just do what you say!

17-01-12, 07:55 PM	#9
J4M1EK Guest Posts: n/a	Can't tell we're on the photo..

17-01-12, 08:38 PM	#10
J4M1EK Guest Posts: n/a	I need to get the bike out and look, it's parked up and can't see the left side! Got them washers out that's why I'd rather do it while it's still in the bike and not lift the tank! Do I remove screw remove stop and put the screw back in?