Power comander problem? - SV650.org

23-03-12, 08:40 PM

Had my race SV650 on the dyno this evening and the power comander is reading roughly 2 x RPM shown on the clock For intance when the the clock on the bike indicates 5000rpm the powercomander is reading 10,000rpm. Has anyone come across this before or is my PC111 buggerd

Dont know if this matters but I just fitted a different set of injectors as the bike was very hard to start and was cutting out on me last season, after I changed the injectors the bike started as normal.

23-03-12, 09:07 PM

Have you reset the throttle position calibration on the pc? Not sure I'd the iii has it but on the PCv you have to set the min and max voltage.
I could only imagine its something to do with the tps but I'm no expert.

DJ123 · 23-03-12, 09:21 PM

mine used to do this as well, no idea why however it always ran ok.
I would drop them an email to pose the question. Everytime i contacted them they were extremely helpful and informative.

flymo · 23-03-12, 09:43 PM

check to ensure your PC has the latest firmware revision installed, there was a software bug related to this that got fixed.

24-03-12, 03:12 PM

Firmware updated today and no difference.

23-03-12, 08:40 PM	#1
weecorey Guest Posts: n/a	Power comander problem? Had my race SV650 on the dyno this evening and the power comander is reading roughly 2 x RPM shown on the clock For intance when the the clock on the bike indicates 5000rpm the powercomander is reading 10,000rpm. Has anyone come across this before or is my PC111 buggerd Dont know if this matters but I just fitted a different set of injectors as the bike was very hard to start and was cutting out on me last season, after I changed the injectors the bike started as normal.

23-03-12, 09:21 PM	#3
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Power comander problem? mine used to do this as well, no idea why however it always ran ok. I would drop them an email to pose the question. Everytime i contacted them they were extremely helpful and informative. __________________ BMW F800ST

23-03-12, 09:43 PM	#4
flymo Member Mega Poster Join Date: Jan 2008 Location: North West Posts: 3,124	Re: Power comander problem? check to ensure your PC has the latest firmware revision installed, there was a software bug related to this that got fixed.

24-03-12, 03:12 PM	#5
weecorey Guest Posts: n/a	Re: Power comander problem? Firmware updated today and no difference.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Power Comander	adjblade	Mini-Twins	4	22-09-11 05:38 PM
curvy 650 power problem	adam_castell	SV Talk, Tuning & Tweaking	4	27-08-08 08:30 AM
power comander and 33 hp chip	kcowgergmm	SV Talk, Tuning & Tweaking	10	29-10-07 10:46 PM
Power Commander power graph print outs.	JimPSV	SV Talk, Tuning & Tweaking	19	27-11-06 09:39 AM

23-03-12, 09:07 PM	#2
Epic Monkey Guest Posts: n/a	Have you reset the throttle position calibration on the pc? Not sure I'd the iii has it but on the PCv you have to set the min and max voltage. I could only imagine its something to do with the tps but I'm no expert.