Bulbs and LED indicator Relay?

Hi all,

Got a 02' Curvy & was wondering about fitting a flasher relay.

Question is,

I have bulb rear indicators & was wondering can I put LED indicators on, + the flasher realy. Would it effect the rear indicators with them not being LED?

I've found threads on this but not with the bulb/LED problem.

The rear indicators are, 12V - 21W Oxford Arrow Indicators if thats any help?

Cheers

[MJC-DEV]

LED relays are electronic and will work with any combination of bulbs and LEDs, although as the timing is fiixed they won't show up a duff bulb by blinking faster.

if you are asking if a relay designed to operate led indicators rather than one for incandescent lamps (bulb) as long as its power rating is sufficient then yes.
Alternatively you could replace the bulbs with led units. (not new indys just replace bulbs with led ones)

Just thinking of putting LED's on the front but would want to keep the rear bulb.

If if was to just add the relay + indicators would it effect the rear bulbs?

Already been answered.
If you are planning to replace the front indicators entirely and leave the rear as is then see answer above. either ensure the relay is rated to handle the power required for the rear bulbs or replace with these.
http://www.autobulbsdirect.co.uk/LED-Indicator-bulbs/