SV Racing Parts, SWATT Clip On Clamps with Risers

Hi Everyone, I have just got in SWATT Black Anodized Clip On Risers and Black Bars with Clip On Clamps sized for 41, 46, and 50mm Forks. Risers sized in 1.5 inch, 2.5inch, and 3.5 inch heights, and Standard Sized Clip On Bars, all Anodized in Black,

I also have One Set of Black SWATT Bar Ends, and Four Sets of the N Model Spacers to keep the Risers off the N model top triple bolts, to provide to SV650.org members.

These are a great addition to stock SV Forks, GSXR front end modifications on the SV, and a host of other applications,



I have purchased all of the available SWATT inventory, these are on a first come, first serve basis and are in stock ready to be shipped. Email me directly at b.layton@svracingparts.com for these parts.

The SWATT Prices are $159.95 for the complete set of Clip On Risers and Bars, with $35 Flat Rate International Shipping to your door, anywhere in the UK or the rest of Europe.

The Black Bar End Set is $20 for the pair, and the N Model Spacers are $20 per set of two.



No PM Please, Preference is given to Email Requests at b.layton@svracingparts.com

If you would like a universal Reservoir mount for the bars, I also have them in stock at $20.



Let me know whenever you are ready, I will PayPal invoice you for the parts you want and get you looked after right away,

Enjoy the ride, and best regards,
Blair

There are Six Sets of 41mm SWATT Clip On Bars, Six Sets of the 50mm SWATT Clip On Bars, and 3 Sets of the 46 mm SWATT Clip On Bars left in stock for immediate shipping,

Email me directly at b.layton@svracingparts.com and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair

[maviczap]

Damn and blast I could have done with these before I purchased my Vario bars. Although I may need the universal reservior mount

These are a sweet set up, The Clip On Clamps are two piece so that they are super easy to install and remove without having to remove the triples,

In Stock Sizes are 41mm, 46mm, and 50mm.

The Risers are in three heights, 1.5, 2.5, and 3.5 inches,

The bars are the standard sized 7/8" diameter and Anodized Black with the ends drilled to accept bar ends and mirrors,

All in all a very nice package, and best of all in stock and ready to ship immediately,

Email me directly for them, b.layton@svracingparts.com

Let me know whenever you are ready, I will PayPal invoice you for the parts you want, and get you looked after right away,

Enjoy the ride, and best regards,
Blair

Gotta vouch for Blair and these clip-ons. Awesome customer service and a great product at a great price.

[yorkie_chris]

It was worth joining up here just to promote this smarmy wazzock? Do I need to dig up the thread where this charmer was lying to us all about safety critical parts after posting up doctored images?

Oh and don't forget, when caught out like that, squeal like a little piggie to the mods and attempt to get any criticism removed! It'll get you banned on SVrider...

Originally Posted by yorkie_chris

It was worth joining up here just to promote this smarmy wazzock? Do I need to dig up the thread where this charmer was lying to us all about safety critical parts after posting up doctored images?

Oh and don't forget, when caught out like that, squeal like a little piggie to the mods and attempt to get any criticism removed! It'll get you banned on SVrider...

Not sure if I've just been besmirched, threatened, or both. I'm sorry if I accidentally ****ed in someones Wheaties, but my only interaction with this guy was the purchase of a product through his website, during which, we traded a few emails to ensure the product was correct and afterwards I thanked him for his customer service. He asked me to leave a kind word on this forum. Seeing as how he went out of his way for me, I did the same for him.

I also signed up on this forum specifically because one of your members (Bibio) is offering a few products (vacuum lines, speedo plate, rear adjusters) that I am interested in purchasing. Do you folks have issues with this guy as well?

Originally Posted by smc11773

Gotta vouch for Blair and these clip-ons. Awesome customer service and a great product at a great price.

Thanks for the good word, I appreciate it. The Clip On Clamps with Risers and Black Bars that I shipped you are the SVRP products on my website at www.svracingparts.com

Anyone else wanting these great products, Woodcraft, MotoSliders SV650 and SV1000 No Cut Frame Sliders or any of our other superb products for Street and Mini-Twin Racing just needs to Go in under For SV Riders on the upper left Categories and then under the product categories,

If you don't see what you want right away, I probably have it in stock but not listed on the website yet so Email me Directly at b.layton@svracingparts.com

I ship worldwide every day and will get you looked after right away,

Enjoy the ride, and best regards,
Blair

[yorkie_chris]

Originally Posted by smc11773

Not sure if I've just been besmirched, threatened, or both.

I also signed up on this forum specifically because one of your members (Bibio) is offering a few products (vacuum lines, speedo plate, rear adjusters) that I am interested in purchasing. Do you folks have issues with this guy as well?

No besmirchment or threatening of you, just a question of your motives! If you're here to talk to Bibio, I've no problem with that whatsoever, I and many other members of this board know him personally from rideouts.
He's very short and profoundly Scottish.


sv-racing-parts on the other hand has a business model that I have occasionally had disagreement with, like his theft of intellectual property, including having the cheek to then use pictures from the same person to sell his copies on eBay and his attempts to get any criticism removed from forums. I was banned from SVrider for asking him to clarify his position on the fitment of the brake caliper adaptor plates.

I hope that clarifies the intent of my earlier message.

[yorkie_chris]

Actually Blair it's not the fact that you have sold bad parts that annoys me, or that you ripped off Zorans designs and pictures to sell his designs on ebay, or even that you lied like a cheap NAAFI watch to everyone on here about the caliper plates.

The thing which really p*sses me off is people who whinge to forum admins when things don't go their way to try and brush negative feedback under the carpet. Doubtless with a healthy contribution to the coffers of any more commercially minded forums than this one. Like this for example...

Originally Posted by admin

Agreed. I've just had another PM from Blair to delete this thread.

thread
http://forums.sv650.org/showthread.php?t=128750

This is the reason I keep bringing your various transgressions up every time you pop up.

Enjoy the ride.