Connector Needed (Solenoid 3 pin) - SV650.org

14-08-13, 07:33 AM

Morning all,

im after a connector for my 99' curvy, its for the solenoid (3 pin connector on the top) preferebly off a loom so it has some length of wire on it. Mine is damaged and only working due to a bodge job

does anyone have one spare of an old loom or know a good place to get one?

only one I found on ebay is from US, be bothered waiting

cheers
Ryan

Sid Squid · 14-08-13, 01:02 PM

It has standard spades on it - use some crimps and put the wires on manually.

14-08-13, 01:43 PM

you mean bypass the connector and just wire straight to the solenoid?

Sid Squid · 14-08-13, 04:58 PM

Yes. The block is just a holder for the actual spade connections. Obviously you'll need to make sure you plug the individual wires into the right spots, but it's an easy, cheap and perfectly good way of making the connections secure and efficient.

14-08-13, 05:18 PM

Sounds like a plan mister squid, thanks mate

14-08-13, 07:33 AM	#1
Corny Gizmo Guest Posts: n/a	Connector Needed (Solenoid 3 pin) Morning all, im after a connector for my 99' curvy, its for the solenoid (3 pin connector on the top) preferebly off a loom so it has some length of wire on it. Mine is damaged and only working due to a bodge job does anyone have one spare of an old loom or know a good place to get one? only one I found on ebay is from US, be bothered waiting cheers Ryan

14-08-13, 01:02 PM	#2
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Connector Needed (Solenoid 3 pin) It has standard spades on it - use some crimps and put the wires on manually. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

14-08-13, 01:43 PM	#3
Corny Gizmo Guest Posts: n/a	Re: Connector Needed (Solenoid 3 pin) you mean bypass the connector and just wire straight to the solenoid?

14-08-13, 04:58 PM	#4
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Connector Needed (Solenoid 3 pin) Yes. The block is just a holder for the actual spade connections. Obviously you'll need to make sure you plug the individual wires into the right spots, but it's an easy, cheap and perfectly good way of making the connections secure and efficient. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

14-08-13, 05:18 PM	#5
Corny Gizmo Guest Posts: n/a	Connector Needed (Solenoid 3 pin) Sounds like a plan mister squid, thanks mate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1999 SV650 Starter solenoid connector replacement?	volvoboy73	SV Talk, Tuning & Tweaking	2	10-12-13 03:46 PM
Mystery connector and URGENT advice on R/R readings needed.	daveyrach	SV Talk, Tuning & Tweaking	19	03-10-11 07:27 AM
Electricial problem - multi pin connector on solenoid.	collis	SV Talk, Tuning & Tweaking	7	05-02-11 06:02 PM
Connector Rod - Help needed!	Fraser	SV Talk, Tuning & Tweaking	2	14-06-08 03:01 PM
Solenoid urgent	Dangerous	Stuff Wanted	0	19-03-06 11:11 AM