Indicator spacers? Curvy.

Just getting round to sorting my indicators after some little [expletive deleted] destroyed one of mine while "parking" his scooter. I have some aftermarket ones, but I can't attach them to the fairings, as the OEM ones have quite a large hole in the fairings.

Another thread I found on here talks about making a plate to bolt to the fairings and then bolt the indicators to it. Does anyone know where I can buy a couple of these plates? (I do not have any of the tools to make the myself.)

Its for a curvy.

Here.
http://www.ebay.co.uk/itm/MOTRAX-IND...item51b99579c8

Thanks NB. Close but no doughnut. Need it for an S. not really the spacers, but a metal plate that bolts onto the fairings, inside the fairings.

That's exactly what they are. The ad is a bit misleading but believe me these are what you need.

Ninth is right, They are the right ones.

He brought some and I got them off him and they fit my faired curvy perfectly with a little sanding to reduce the tightness.

I found that when I changed mkne, I cut down the rubber stem thing that goes through the fairing so I could just put the aftermarket bolt through it and have tye space to screw the nut on, a bit of a bodge but it ended up looking quite good

fair enough. sorry to doubt you. Will order up a pair.

Cheers for the help guys.

[Tomor]

They are what you need clunketyclunk.

When I put LED indicators on mine, I discovered that one side had obviously been bashed in the past. The spacer was only held together with age and dirt! I ended up making a new one out of a couple of layers of thin plastic, trimmed with scissors and superglued together, then a big fat washer behind. Simples

Ta chaps. Just ordered a set.

DJ, yeah can't really be bothered just to save a fiver. Time has become a bit precious to me recently.