Gear shifter peg repair? - SV650.org

25-05-14, 08:35 PM

Hi, I dropped the bike and the gear shifter peg snapped off from the main lever, as it is meant to do ,I guess. Did I see on here somewhere that someone provides replacements that can be bolted on after the old bit has been drilled out ?

admin · 25-05-14, 09:54 PM

I drilled a hole tapped it and then used a spare bolt.

You might be thinking of this http://www.visordown.com/motorcycle-...onds/6083.html

sent via Pony Express

26-05-14, 05:45 AM

Thanks for reply, that's what I will do, cheers

26-05-14, 05:49 AM

DONT I SAY AGAIN DONT BUY THE MOTRAX VERSION

or the org will turn on you like 2 month old milk

hth
DP

admin · 26-05-14, 08:54 AM

My bolt bodge was meant to be a temporary fix but worked as well as the original so I left it. I even had the rubber attached.

sent via Pony Express

27-05-14, 12:44 PM

Just remember when you remove it to put it back on the right way round. Unless of course you want race gearing (1 up 5 down.)

Sent via the medium of interpretative dance.

Jason H · 28-05-14, 10:21 AM

I can also confirm the bolt repair works a treat having had it on the bike for approx. 17k miles.

J

johnnyrod · 30-05-14, 10:27 AM

Yep

25-05-14, 08:35 PM	#1
bongo Guest Posts: n/a	Gear shifter peg repair? Hi, I dropped the bike and the gear shifter peg snapped off from the main lever, as it is meant to do ,I guess. Did I see on here somewhere that someone provides replacements that can be bolted on after the old bit has been drilled out ?

25-05-14, 09:54 PM	#2
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,524	Re: Gear shifter peg repair I drilled a hole tapped it and then used a spare bolt. You might be thinking of this http://www.visordown.com/motorcycle-...onds/6083.html sent via Pony Express __________________ Admin for this forum and the main site. John@sv650.org Last edited by admin; 25-05-14 at 10:09 PM.

26-05-14, 05:45 AM	#3
bongo Guest Posts: n/a	Re: Gear shifter peg repair? Thanks for reply, that's what I will do, cheers

26-05-14, 05:49 AM	#4
davepreston Guest Posts: n/a	Re: Gear shifter peg repair? DONT I SAY AGAIN DONT BUY THE MOTRAX VERSION or the org will turn on you like 2 month old milk hth DP

26-05-14, 08:54 AM	#5
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,524	Re: Gear shifter peg repair? My bolt bodge was meant to be a temporary fix but worked as well as the original so I left it. I even had the rubber attached. sent via Pony Express __________________ Admin for this forum and the main site. John@sv650.org Last edited by admin; 26-05-14 at 08:57 AM.

27-05-14, 12:44 PM	#6
Matt-EUC Guest Posts: n/a	Gear shifter peg repair? Just remember when you remove it to put it back on the right way round. Unless of course you want race gearing (1 up 5 down.) Sent via the medium of interpretative dance.

28-05-14, 10:21 AM	#7
Jason H Member Join Date: Mar 2013 Location: Sussex...Previously a Somerset Lad Posts: 276	Re: Gear shifter peg repair? I can also confirm the bolt repair works a treat having had it on the bike for approx. 17k miles. J __________________ Naked K5 - Now Red with sexy stripes!! Mods: Renthal Flat bars, 's' clutch perch, GSXR front master cylinder, CNC shorty levers, Tail Tidy, Fuel Mini S/S Slip-on, 15/47, 's' Swing-arm, Pillion seat cowl, GSXR 750 front end, CNC polished top yoke, R6 Throttle tube, GSXR rear shock Rotate your Owl

30-05-14, 10:27 AM	#8
johnnyrod Member Mega Poster Join Date: Jul 2003 Location: Doncaster, oop norf Posts: 2,128	Re: Gear shifter peg repair? Yep

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gear shifter spindle	Fozzy	SV Talk, Tuning & Tweaking	9	26-06-12 02:04 PM
Desperaley need a k6 gear shifter	joshwalker094	Stuff Wanted	15	19-12-11 09:38 AM
Curvy gear shifter	JamesMio	Stuff Wanted	3	28-02-11 05:21 PM
Goodby Gear shifter :(	hob	SV Talk, Tuning & Tweaking	7	18-11-08 05:29 PM
Gear shifter linkage rod	Razor	SV Talk, Tuning & Tweaking	5	05-01-07 11:26 PM