Gen 2 clocks on gen 1 sv650 ... Speedo healer the cure?

[CLARKYsv]

So ... I'm looking at being a bit adventurous and I've done my research in regards to the swapping of a 2nd gen guage cluster on to a gen 1 ... The big issue people had was the tacho measuring double?

Well I have a 07 fireblade speedo healer which is apparently compatible with sv650 99-13 and plug n play... So if that is the case of the tacho reading double, in theory wouldn't I be able to attach the speedo healer and rude the speed by 50% and this solve the problem?

Suggestions please

[Bibio]

easier solution, just get a second gen speedo drive... there sorted. TBH there should be no difference up to 2005 or when the rev counter on the second gen turned all white.

[CLARKYsv]

I would love to but I did something stupid and did a front end conversion with a GSXR 750 k2 front end.... whoops :P

[Bibio]

if you have oem discs they should have 8 buttons. put 4 magnets evenly spaced and a geartooth hall sensor on and bingo, working speedo

[CLARKYsv]

Think I might have interpreted it wrong ... It's the revs that appear doubled not the speedo... apparently you have to wire a flip flop in to make it work...

[Bibio]

ahhhh. cant help you there.

[TSM]

And the FI light will always be on as you do not have the FI system, poss the water temp sensor being different and I think the speedo will also be off due to different amount of pickups.
I think Stig did this to his bike a long time ago.