Anyone know if.... - SV650.org

01-01-16, 12:33 AM

This will go on a 2003 SV 650s?

http://www.ebay.co.uk/itm/Suzuki-SV6...4AAOSwwbdWLM1Y

Thanks
Ty

Nutsinatin · 01-01-16, 10:07 AM

The mounting bracket won't fit the K3 and I don't think the linkage rod would be compatible, I'm pretty sure the K3 model has a unique rearset mounting bracket which is different to both the 99-02 models and 04+.

01-01-16, 08:18 PM

Pretty sure curvy ones don't fit a pointy, but I fitted footrest hangers, pegs and controls from an SK6 to my sk3. They are different as nutsinatin says, but seemed to work ok.

May have the brackets/hangers from the sk3 somewhere but definitely no gear/brake lever or fittings.

Mick..

01-01-16, 08:29 PM

All i need it for is the peg and the nobbly bit on the end of the gear shifter, Seems those bits might fit onto my bike. / fingers crossed!

http://1drv.ms/1PBoRFs <----- tried to insert an image but it wouldnt let me, Chek out this pic on my onedrive.

01-01-16, 12:33 AM	#1
Tyler Durden Guest Posts: n/a	Anyone know if.... This will go on a 2003 SV 650s? http://www.ebay.co.uk/itm/Suzuki-SV6...4AAOSwwbdWLM1Y Thanks Ty

01-01-16, 10:07 AM	#2
Nutsinatin Member Join Date: Jan 2013 Location: Lyne, Surrey Posts: 570	Re: Anyone know if.... The mounting bracket won't fit the K3 and I don't think the linkage rod would be compatible, I'm pretty sure the K3 model has a unique rearset mounting bracket which is different to both the 99-02 models and 04+. __________________ Blue K9 Pointy - Squished by a car/kerb/wall Blue K9 Pointy #2 - Nearly at 120,000 miles!

01-01-16, 08:18 PM	#3
Geordie Mick Guest Posts: n/a	Re: Anyone know if.... Pretty sure curvy ones don't fit a pointy, but I fitted footrest hangers, pegs and controls from an SK6 to my sk3. They are different as nutsinatin says, but seemed to work ok. May have the brackets/hangers from the sk3 somewhere but definitely no gear/brake lever or fittings. Mick..

01-01-16, 08:29 PM	#4
Tyler Durden Guest Posts: n/a	Re: Anyone know if.... All i need it for is the peg and the nobbly bit on the end of the gear shifter, Seems those bits might fit onto my bike. / fingers crossed! http://1drv.ms/1PBoRFs <----- tried to insert an image but it wouldnt let me, Chek out this pic on my onedrive. Last edited by Tyler Durden; 01-01-16 at 08:30 PM.