Acumen Pager Installation???? Help - SV650.org

14-01-05, 05:53 PM

Has anybody installed one of these pager systems onto there SV? If poss could anybody give me some pointers on how to fit it as it seems to installing the wrong way round. Idiot proof picture would be great. Please help..... STUMPED

TSM · 03-03-05, 09:12 AM

did you get it installed in the end. How much did you pay for the pager?

The guy i will possably buy from on ebay says that he is a datatool installer. He says that it is realy easy, just ground the yellow wire on the datatool. Connect the Yellow/Green (on a system 3) wire to the trigger on the pager unit. The pager needs a ground, perm live & switched live (on SK2 its the thick orange wire that comes from the bottom of the fuse box).

That should be it, aparently.

10-03-05, 02:38 PM

Havent put it on yet cause of the bloody cold weather. I have a systems 3 datatool so you have cleared up some issues. But how do I connect the pager to the ignition? Havent got a bloody clue on what wire to use? I have a K3 models. Gonna start playing with it soon.. Anymore info will be greatly appreciated. After I have done it I will post it on here for everyone else...

O yeah paid £99 squids for it.

14-01-05, 05:53 PM	#1
bobbydee Guest Posts: n/a	Acumen Pager Installation???? Help Has anybody installed one of these pager systems onto there SV? If poss could anybody give me some pointers on how to fit it as it seems to installing the wrong way round. Idiot proof picture would be great. Please help..... STUMPED

03-03-05, 09:12 AM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	did you get it installed in the end. How much did you pay for the pager? The guy i will possably buy from on ebay says that he is a datatool installer. He says that it is realy easy, just ground the yellow wire on the datatool. Connect the Yellow/Green (on a system 3) wire to the trigger on the pager unit. The pager needs a ground, perm live & switched live (on SK2 its the thick orange wire that comes from the bottom of the fuse box). That should be it, aparently. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Acumen CAT6 Immobiliser	the_lone_wolf	For Sale - SV's and SV related items	0	09-11-08 04:17 PM
Acumen Cat 1... If you've got problems, read this!	dmracing	SV Talk, Tuning & Tweaking	2	04-10-06 08:14 AM
Acumen PD8 AHHHHHHHHHHHHHHHHHHH	Hogzi	SV Talk, Tuning & Tweaking	1	28-03-06 08:24 PM
Acumen DG8 wiring problems?	daddy_sperm	SV Talk, Tuning & Tweaking	1	23-07-05 09:29 PM
Acumen pagers	Ncoll	SV Talk, Tuning & Tweaking	1	03-03-05 09:14 AM

10-03-05, 02:38 PM	#3
bobbydee Guest Posts: n/a	Havent put it on yet cause of the bloody cold weather. I have a systems 3 datatool so you have cleared up some issues. But how do I connect the pager to the ignition? Havent got a bloody clue on what wire to use? I have a K3 models. Gonna start playing with it soon.. Anymore info will be greatly appreciated. After I have done it I will post it on here for everyone else... O yeah paid £99 squids for it.