Remus help - SV650.org

24-03-06, 11:57 AM

Hi All,

I've ordered a brand new Remus through Demon-Tweeks - it arrived in good time, but there's bits missing from the kit. What I've got is the can and a loop bracket in a box and a bag with the high-level link pipe, and that's it. Big gaping hole in the bag that the pipe came in makes me suspect that someone 'borrowed' the rest of the fittings. I've got no springs, no hanger for the bracket, etc.

Spoken to customer service at Demon-Tweeks and their being very helpful - but I kinda feel that I need to know what I SHOULD have had to ensure I get it all next time - anyone out there with a Remus High Level set up that can help?

Cheers,

J

24-03-06, 06:38 PM

Which Remus is it

If its a Revolution it doesn't have a 'loop' to hold onto the can, it has a chrome bracket wich attaches to the two bolts where the pillion peg attaches (on the K3+ bikes anyway

)

24-03-06, 06:43 PM

Quote:

Originally Posted by Cloggsy

Which Remus is it

If its a Revolution it doesn't have a 'loop' to hold onto the can, it has a chrome bracket wich attaches to the two bolts where the pillion peg attaches (on the K3+ bikes anyway

)

Yep, thats how it's held on on my K5 as well.

24-03-06, 06:56 PM

Thats how all of the Remus Revolution cans are held on I think.... same on my Kwak.. but a different sized bracket...

25-03-06, 05:56 PM

Thanks for the replies - the high level definitely does use a bracket - I know what it's supposed to look like from Jonboy's pic here http://forums.sv650.org/viewtopic.ph...326&highlight=

I just don't know the full list of bits that there should be with it.

Remus are sending me a whole new link pipe kit now though so all should be well.

Thanks again.

24-03-06, 11:57 AM	#1
Jay Guest Posts: n/a	Remus help Hi All, I've ordered a brand new Remus through Demon-Tweeks - it arrived in good time, but there's bits missing from the kit. What I've got is the can and a loop bracket in a box and a bag with the high-level link pipe, and that's it. Big gaping hole in the bag that the pipe came in makes me suspect that someone 'borrowed' the rest of the fittings. I've got no springs, no hanger for the bracket, etc. Spoken to customer service at Demon-Tweeks and their being very helpful - but I kinda feel that I need to know what I SHOULD have had to ensure I get it all next time - anyone out there with a Remus High Level set up that can help? Cheers, J

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remus and my rse end	danf1234	SV Talk, Tuning & Tweaking	3	28-02-07 08:45 PM
Swapping my Remus Genesis Race CAn for a Quiter REMUS	SpankyHam	For Sale - SV's and SV related items	19	05-04-06 06:13 PM
Which Remus?	Steeler	Exhausts	28	22-08-05 07:18 AM
which remus can is the best?	bdog	Exhausts	9	31-05-05 07:54 PM
???? AZL, Remus can	steveo	Soho Massive	1	29-04-05 09:03 AM

24-03-06, 06:38 PM	#2
Cloggsy Guest Posts: n/a	Which Remus is it If its a Revolution it doesn't have a 'loop' to hold onto the can, it has a chrome bracket wich attaches to the two bolts where the pillion peg attaches (on the K3+ bikes anyway )

24-03-06, 06:56 PM	#4
valleyboy Guest Posts: n/a	Thats how all of the Remus Revolution cans are held on I think.... same on my Kwak.. but a different sized bracket...

25-03-06, 05:56 PM	#5
Jay Guest Posts: n/a	Thanks for the replies - the high level definitely does use a bracket - I know what it's supposed to look like from Jonboy's pic here http://forums.sv650.org/viewtopic.ph...326&highlight= I just don't know the full list of bits that there should be with it. Remus are sending me a whole new link pipe kit now though so all should be well. Thanks again.