 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
05-04-06, 05:15 PM
|
#1 |
|
Guest
Posts: n/a
|
Zorst related questions.
I have a new Fuel exhaust on the bike
 and the baffle fell out  which sounds ace  aside from the popping on the over run (I think it is called) that sounds like mini backfires, I have been told this is normal so is there anyway to stop it? I don't like it.Also now that I have such a shiny can with link pipe it has show quite how bad the rest of my pipe work is  . Could anyone give me an idiot’s guide on the best way to re shine the pipe work? As I know there is more to it than applying a load of polish and I was told once but I cannie find the thread, I remember talk of wet and dry etc.
|
|
|
05-04-06, 05:52 PM
|
#2 |
|
Guest
Posts: n/a
|
Re the popping, get you fueling remaped, costs about £15 from a suzuki dealers, sorts it out, and no need to spend loads of money.
For the pipe work Autosol + elbow grease = Shiney! |
|
|
|
05-04-06, 05:58 PM
|
#3 |
|
Guest
Posts: n/a
|
Make sure there's no leaks, mine backfired a bit when first fitted until I sealed it on
|
|
|
|
05-04-06, 05:59 PM
|
#4 |
|
Guest
Posts: n/a
|
Autosol if you really want to spend the rest of your life getting it like new.
Wet and dry and THEN autosol (or preferably something that isn't a finishing polish like autosol is) is the way to do it.
|
|
|
|
05-04-06, 06:00 PM
|
#5 |
|
Guest
Posts: n/a
|
I put a load of exaust selant between the link pipe and the end can and the original pipework maybe it needed more.
Also what polish isn't a finishing polish? (Sorry for the dumb questions I just have no idea) |
|
|
|
05-04-06, 06:03 PM
|
#6 | |
|
Guest
Posts: n/a
|
Quote:
|
|
|
|
|
05-04-06, 06:08 PM
|
#7 |
|
Guest
Posts: n/a
|
the poping on the over run is the best bit!
i use a rag with autosol dipped in a little silver sand to give the downpipe a polish, the sand just help to cut the tarnish off the pipe. |
|
|
|
05-04-06, 06:14 PM
|
#8 | ||
|
Guest
Posts: n/a
|
Quote:
|
||
|
|
|
05-04-06, 07:18 PM
|
#9 |
|
Guest
Posts: n/a
|
|
|
|
|
05-04-06, 07:20 PM
|
#10 |
|
Guest
Posts: n/a
|
Any idea how to make a bike pop on request with an aftermarket can on?
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The zorst has to go! | Rich | Bikes - Talk & Issues | 52 | 30-08-08 03:34 PM |
| New Zorst | plowsie | SV Talk, Tuning & Tweaking | 66 | 01-11-07 11:53 PM |
| Will I have to cut my OE zorst off? | wooly | SV Talk, Tuning & Tweaking | 12 | 01-06-07 07:38 PM |
| new zorst | sarah | Guildford Massive | 26 | 26-03-07 05:52 AM |
| New 'zorst | El Saxo | Photos | 12 | 04-04-06 10:09 PM |
