Mot - SV650.org

29-06-07, 06:12 PM

I've just put my SV650S K4 through its first MOT and it failed. The tester said the wheels were not in line by about 3/4 of an inch (20mm). I have had the bike from new, its done 13000 miles and never been dropped. The handling seems fine and tyre wear is good and even. The tyres are Pirelli Diablos. I have checked that the rear wheel is adjusted correctly and the chain run looks nigh on straight to me. Anyone any ideas?

Regards,

Tim

Chippenham

29-06-07, 06:19 PM

I cant help as im a technical numpty.
Go in the south west surfers section and introduce yourself, theres about 4/5 from chippenham

Welcome to the madhouse by the way, i'm sure a mechanical guru will be along in a minute to help you out

Wideboy · 29-06-07, 10:06 PM

20 mil hmm im and numpty when engine have more than 1 cylinder but i have to say with that amount i think you would notice

tigersaw · 29-06-07, 11:51 PM

This was when they put the planks either side?
Uneven forks can push the wheel out a tad, so can accident damage, so can missing or wrong spacers.
My DR350 had this every MOT, but they never failed it, saying it was not a reason for failure, so long as everything was true - which it was.

29-06-07, 06:12 PM	#1
Icarus Guest Posts: n/a	Mot I've just put my SV650S K4 through its first MOT and it failed. The tester said the wheels were not in line by about 3/4 of an inch (20mm). I have had the bike from new, its done 13000 miles and never been dropped. The handling seems fine and tyre wear is good and even. The tyres are Pirelli Diablos. I have checked that the rear wheel is adjusted correctly and the chain run looks nigh on straight to me. Anyone any ideas? Regards, Tim Chippenham

29-06-07, 06:19 PM	#2
cuffy Guest Posts: n/a	Re: Mot I cant help as im a technical numpty. Go in the south west surfers section and introduce yourself, theres about 4/5 from chippenham Welcome to the madhouse by the way, i'm sure a mechanical guru will be along in a minute to help you out

29-06-07, 10:06 PM	#3
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	Re: Mot 20 mil hmm im and numpty when engine have more than 1 cylinder but i have to say with that amount i think you would notice __________________ 05 DRZ400E RIP hovis

29-06-07, 11:51 PM	#4
tigersaw Member Mega Poster Join Date: Mar 2005 Location: Llanwrtyd Wells Powys Posts: 1,146	Re: Mot This was when they put the planks either side? Uneven forks can push the wheel out a tad, so can accident damage, so can missing or wrong spacers. My DR350 had this every MOT, but they never failed it, saying it was not a reason for failure, so long as everything was true - which it was.